Sub-GHz RF Mesh Module

Your position:Home > Product Center > Sub-GHz RF Mesh Module

Sub-GHz RF Mesh Single Phase Terminal Slave Module

Product ID.: WL410S/ WL411S/ WL412S

Communication mode:UART(Local), RF(Remote)

WL410S/ WL411S/ WL412S module works as DN (Distributed Node) in fast wireless data transmission Mesh network, connect and collocate with terminal devices linked to the micro-power network, and finish relay and collection of network data

  • Anti-interference function. Use low noise, high receiver sensitivity and advanced data encryption technology. High anti-interference function, high communication rate;
  • Binary channel, independent communication. Adopt independent communication strategies in CN and UN channels to maximize user experience;
  • Networking function. Quickly respond to mesh command from wireless communication modules. Repeat and collect data after entering into the network;
  • Wireless communication environment analysis function. Inquire RSSI of communication link between nodes through directive to check current communication quality;
  • Support user device connection. System will allocate one UN channel for user device and strengthen interaction with users;
  • Event report function. Automatically send data to CN/UN;
  • Local communication parameter self-adaptation. Support local communication baud rate and handshaking self-adaptation.
Item Parameter
Dimension 69mm×50mm×27mm
Operation mode Mesh/P2P
Working frequency band Sub-GHz (customizable)
Modulation mode 2FSK
Channel separation 400kHz
RF transmitting rate ≤20dBm (customizable)
Air transmission rate 10 kbps
Local communication rate DN(4800/9600bps), UN(9600bps)
Local communication verification mode 8E1/8N1
Local communication buffer space 224 Bytes(DN channel),255 Bytes(UN channel)
Working humidity 10%~90% (no condensation)
Working temperature -40℃~85℃
Power supply 12±2V
Emitting current 48mA
Received current 17mA
Line of sight @10 kbps@100 mW >1km
Antenna characteristic impedance 50Ω