PLC Mesh Module

Your position：Home > Product Center > PLC Mesh Module

PLC Mesh Three Phase Terminal Slave Module

Product ID.：WL413T

Communication mode：UART（Local），PLC（Remote)

WL413T module works as DN (Distributed Node) in fast wireless data transmission Mesh network, connect and collocate with terminal devices linked to the micro-power network, and finish relay and collection of network data. This module is plug-and-play, making field construction quite simple. Applicable to AMR/AMI/IoT, it can collect and calculate RSSI and SNR, providing reference data for mesh and PLC communication environment.

  • Main Functions
  • Technical Parameters
  • Anti-interference function. Use low noise, high receiver sensitivity and advanced data encryption technology. High anti-interference function, high communication rate;
  • Binary channel, independent communication. Adopt DBPSK and DQPSK PLC modulation mode in CN and UN channels to maximize user experience;
  • Networking function. Quickly respond to mesh command from wireless communication modules. Repeat and collect data after entering into the network;
  • Wireless communication environment analysis function. Inquire RSSI and SNR of communication link between nodes via directive to check current communication quality;
  • Support user device connection. System will allocate one UN channel for user device and strengthen interaction with users;
  • Event report function. Automatically send data to PLC fast data transmission Mesh gateway module or user devices;
  • Local communication parameter self-adaptation. Support local communication baud rate and handshaking self-adaptation.
Item Parameter
Dimension 95mm×65mm×34mm
Power supply 12V ～ 15V
Coupled circuit 3 circuits
Local communication rate 2400/4800/9600bps
Local communication verification mode 8E1/8N1
Working humidity 10% ～ 90% (no condensation)
Working temperature -40 ℃ ～ 85 ℃
Operation mode Mesh P2P
Communication frequency 125KHz 180KHz
Modulation mode DBPSK DQPSK
Channel CN UN
PLC transmitting rate 4.096ms/Byte 1.024ms/Byte
Static consumption 266mW 266mW
Dynamic consumption 956mW 1372mW
Typical value of PLC transmitting current 56mA 90mA
Local communication buffer 179Bytes 210Bytes